Astral Anti-Chip Black is a rubber based, air drying polymer compound for use in areas requiring added stonechip and corrosion protection. With excellent adhesion to most surfaces, Astral Anti-Chip Black offers a flexible salt and corrosion resistant film that also reduces road noise and is particularly suited to the protection of sills, lower doors, spoilers, valances and underbody areas. The high build, anti-sag formula produces a textured finish similar to manufacturers original and is fully over-paintable with most paints once dry. Supplied in a large 500ml aerosol for economy.
Shake can well for 2 minutes before use. Ensure the area to be treated is dry and free from oil, grease and loose dirt and rust. With the surface dry, it is recommended the surrounding area is masked off to prevent overspray. Best results will be achieved by applying a number of fine coats, sprayed evenly from a distance of 8-10 inches, to build up a stippled even film. Invert can and spray short bursts after use to clear actuator.